MAKING A CALL
➊
Key in the area code and the phone number of the per-
son you wish to call.
• If you make a mistake, you can delete the digits one by
one by pressing the
C
key repeatedly or clear the whole
display by pressing and holding down the
C
key.
➋
Press the key to dial the phone number. The
indicator will come on and the text
CALLING
and the
dialled number will be displayed.
• If you want to cancel the call, press .
➌
When the phone number disappears and the text
CALL 1
is shown, the call is connected. Wait for the answer, then
speak.
• To view the duration of the call, press
Menu
6 1 1
.
• To alter the volume of the phone’s earpiece, use the
two buttons on the side of the phone. The upper button
increases the volume and the lower button decreases it.
• To mute the phone’s microphone, press and hold the
Menu
selection key for a second, press or to
move the pointer to
Mute
and press the
OK
selection
key. To unmute the microphone, follow the same
procedure but select
Unmute
instead.
➍
End the call by pressing .
Dialling a phone number by using an associated name
If you have stored a phone number with a name in a stand-
ard memory location (see Storing a Phone Number With a
Name in chapter Memory Functions) you can dial the phone
number by simply keying in the name and pressing .
➊
Press the
ABC
key to enter alpha mode.
NHE-4NX (2110 model II)
9350586 (en) ISSUE 5
9350637 (issue 3)
NHK-4NX (2140)
9350693 (en)
ISSUE 3
NHE-4NY (2118)
9350593 (en)
ISSUE 5
NHK-4NY (2148)
9350696 (en)
ISSUE 3
General Functions
28
To Next Page
Loading...
Need help?
General
