requests that the requested operation be performed.
After receiving a response from the network, the phone
will end the call automatically.
• If you selected
Activate
or
Cancel
, call waiting is set on
or off, respectively.
• If you selected
Status
, the phone will list the call types
(e.g. voice call, data call, fax call) to which call waiting
applies or can be applied. Press or to scroll
through the list.
Note:
Instead of using this menu function, you may set on
and off call waiting by using manual command strings. In idle
mode, key in a command string and press the key to
transmit it to the network. For required command strings,
contact your network operator.
RESTORE FACTORY SETTINGS (Menu 4 12)
You can reset the settings of the menu functions to their
original values.
Note that this function will not affect the following items:
• stored phone numbers and names
• access codes
• earpiece volume setting
• the following SMS message settings:
Messages Sent As (Menu 2 5 2), Accept Reply Cost
(Menu 2 5 3), Message Validity (Menu 2 5 5)
• language (Menu 4 14)
• call timers and cost counters (Menu 6)
➊
Press
Menu
4 12
to enter this function.
The phone will prompt for the security code.
➋
Key in the five-digit code and press the
OK
selection key.
Menu Functions
71
To Next Page
Loading...
Need help?
General
