Event and Accounting Logs
312
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
The no form of the command removes the severity match criterion.
Default no severity
Parameters eq | neq | lt | lte | gt | gte — this operator specifies the type of match. Valid operators
are listed in Table 38.
severity-level — the ITU severity level number. Table 39 lists severity levels and
corresponding numbers per ITU standards M.3100 X.733 & X.21 severity levels.
subject
Syntax subject {eq | neq} subject [regexp]
no subject
Context config>log>filter>entry>match
Description This command adds an event subject as a match criterion.
Table 38 Valid Operators for Event Severity
Operator Notes
eq Equal to
neq Not equal to
lt Less than
lte Less than or equal to
gt Greater than
gte Greater than or equal to
Table 39 Severity Levels
Severity Number Severity Level
1 Cleared
2 Indeterminate (info)
3 Critical
4Major
5Minor
6 Warning
To Next Page
Loading...
