Nokia 9000i - Page 168

After Sales
Technical Documentation
RAE/RAK–1N
Service Software
Page 7– 10
Amendment 1 04/97
Complete Menu Structure
MAIN
1 Program setup
2 Initialize CMT
3 CMT Testing and Adjustment
4 CMT ME Memory Functions
5 CMT Power–up Self–tests
6 CMT SW and HW Versions
7 Phone Mode (Local/Normal)..:Local
8 PDA Functions
9 Faultlog
Q Quit
CMT ME Memory Functions
1 User Settings and Values
2 Product Profile Settings
3 Write HW Version
4 IMEI Edit
5 IMEI Transfer
6 Set UI Factory Values
7 Set Factory Values
CMT Testing and Adjustments
1 RF Controls
2 Adjustments
3 Call Simulation
4 Internal Audio Loop
5 External Audio Loop
6 Logic Controls
7 Run MCU Selftests
8 Set MCU Start–Up Self–tests
PC Setup
1 Load New Setup
2 Save Current Setup
CMT Power–up Selftests
MCU Internal Test.........................:OK
MCU RAM BUS Test.....................:OK
MCU IMEI Test..............................:OK
MCU ROM BUS Test:....................:OK
MCU ROM DATA Test....................OK
MCU ASIC BUS Test.....................:OK
MCU ASIC Timer & IRQX Test.......:OK
MCU ASIC Timer & NMI Test.........:OK
MCU Audio Codec Test..................:OK
MCU DSP Code Download...........: OK
MCU EEPROM Checksum Test: OK
MCU SIM LOCK ChecksumTests..: OK
CMT SW and HW Versions
MCU Internal SW Version.: 2.16 18–09–95 D8 (c) NMP.
MCU External SW Version: 2.61 18–03–96 GE8 (c) NMP.
DSP Internal SW Version..: ROM7 (MD)
DSP External SW Version.: G7.21CR
ASIC Version.....................: G–3
HW Version.......................: 0001
Manufacture month............: 0396
PDA Functions
1 Initialisation
2 Test Peripherals
3 Flash Utilities
4 DRAM Utilities
5 I/O Space Functions
6 Product information