may damage the card and the device and corrupt data stored
on the card.
Keep all memory cards out of the reach of small
children.
Check the compatibility of a memory card with its
manufacturer or provider.
A compatible memory card may be included in the
sales package. The memory card may be already
inserted in the device. If not, do the following:
1. To prevent the battery from coming loose, place the
device so that the back cover is facing up.
2. Remove the back cover.
3. Insert the memory card in the slot with the contact area
first. Ensure the contact area is facing the connectors on
the device.
4. Push the card in until it locks into place.
5. Replace the back cover.
Remove the memory card
Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may damage
the memory card as well as the device, and data stored on
the card may be corrupted.
1. Press the power key briefly, and select Remove memory
card.
2. To prevent the battery from coming loose, place the
device so that the back cover is facing up.
3. Remove the back cover.
4. Press the end of the memory card to release it from the
memory card slot, and remove the card.
5. Replace the back cover.
First start-up
1. Press and hold the power key until you
feel the device vibrate.
2. If prompted, enter the PIN code or lock
code, and select OK.
3. When prompted, enter the country in
which you are located and the current
date and time. To find your country,
enter the first letters of the country
name. It is important to select the correct
country, because scheduled calendar
entries may change if you change the
country later and the new country is
located in a different time zone.
4. The Phone setup application opens. To set up an
application, select Start. To bypass setting up
© 2009 Nokia. All rights reserved. 13
To Next Page
Loading...
Need help?
General
Weight and Dimensions
