3. Select WLAN security settings > WPA/WPA2 > EAP >
EAP plug-in settings.
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN using the
access point, select the desired plug-in and Options >
Enable. The EAP plug-ins enabled for use with this access
point have a check mark next to them. To not use a plug-in,
select Options > Disable.
To edit the EAP plug-in settings, select Options > Edit.
To change the priority of the EAP plug-in settings, select
Options > Raise priority to attempt to use the plug-in
before other plug-ins when connecting to the network with
the access point, or Options > Lower priority to use this
plug-in for network authentication after attempting to use
other plug-ins.
See the device help for more information on EAP plugins.
Session initiation protocol (SIP)
settings
Select Menu > Ctrl. panel > Settings and Connection >
SIP settings.
The session initiation protocol (SIP) is used for creating,
modifying, and terminating certain types of communication
sessions with one or more participants (network service).
Typical communication sessions are video sharing and net
calls. SIP profiles include settings for these sessions. The SIP
profile used by default for a communication session is
underlined.
To create a SIP profile, select Options > New SIP profile >
Use default profile or Use existing profile.
To select the SIP profile you want to use by default for
communication sessions, select Options > Default profile.
Edit SIP profiles
Select Menu > Ctrl. panel > Settings and Connection >
SIP settings.
Select Options > Edit and from the following:
• Profile name — Enter a name for the SIP profile.
• Service profile — Select IETF or Nokia 3GPP.
• Default destination — Select the destination to use for
the internet connection.
• Default access point — Select the access point to use for
the internet connection.
• Public user name — Enter your user name provided by
your service provider.
• Use compression — Select if compression is used.
• Registration — Select the registration mode.
• Use security — Select if security negotiation is used.
• Proxy server — Enter the proxy server settings for this
SIP profile.
• Registrar server — Enter the registration server settings
for this SIP profile.
Edit SIP proxy servers
Select Options > New SIP profile or Edit > Proxy server.
© 2009 Nokia. All rights reserved. 151
To Next Page
Loading...
Need help?
General
Weight and Dimensions
