114Copyright © 2005 Nokia. All rights reserved.
Depending on network support and predefined radio settings, it may be possible to
make and receive group calls and red key calls during a WAP connection.
During a call, data transfer is suspended. After the call ends, the radio tries to
resume the WAP connection.
Basic steps for accessing and using WAP services
1. Save the service settings that are needed to access the WAP service that you
want to use. See Setting up the radio for a WAP service below and Appearance
settings of WAP browser on page 120.
2. Make a connection to the given WAP service. See Making a connection to a
WAP service on page 117.
3. Start browsing the pages of the WAP service. See Browsing the pages of a WAP
service on page 118.
4. Once you are done with browsing, end the connection to the WAP service. See
Ending a WAP connection on page 120.
Setting up the radio for a WAP service
You may receive the service settings as a text message from the network operator
or service provider that offers the WAP service that you want to use. For more
information, contact your network operator or service provider.
You can also key in the settings manually. For appropriate settings, contact your
network operator or service provider. The WAP settings may be available, for
example, on the Web site of the network operator or service provider.
To Next Page
Loading...