117Copyright © 2005 Nokia. All rights reserved.
Making a connection to a WAP service
Firstly, make sure that the service settings of the WAP service you want to use are
activated. To activate the settings:
• Press Menu and select Services and Settings. Select Active service settings and
scroll to the set you want to activate and press Activate.
Secondly, make a connection to the WAP service. There are three ways to connect:
• Open the homepage of the WAP service:
Press Menu and select Services and Home.
Tip: To quickly open the homepage of a WAP service:
in standby mode, press and hold .
Or
• Select a bookmark of the WAP service:
Press Menu, select Services, Bookmarks, and select a bookmark.
If the bookmark does not work with the current active service settings, activate
another set of service settings and try again.
Or
• Key in the address of the WAP service:
Press Menu and select Services and Go to address. Key in the address of the
WAP service, press for special characters, and press OK.
Note that it is not necessary to add the prefix http:// in front of the address
since it will be added automatically.
To Next Page
Loading...