67Copyright © 2005 Nokia. All rights reserved.
■ Using direct mode
Activating direct mode
To activate direct mode, press Menu and select Settings, Phone settings, Active
mode and Direct. To return to network mode, select Network.
You can also activate direct mode and network mode in the fast menu, see Fast
menu on page 44.
When you activate direct mode, the selected channel and group will be those that
were last selected in direct mode. When you return to network mode, the selected
folder and group will be those that were last selected in network mode.
In standby mode, the indicator indicates that direct mode is active. The
names of the selected channel and group are shown on the display. The bar above
indicates the signal strength of the radio you are receiving communication
from. The higher the bar, the stronger the signal and the better you can receive the
communication.
If a compatible direct mode gateway is available, is displayed in standby
mode and the bar above indicates the signal strength of the gateway. If a
compatible direct mode repeater is available, is displayed in standby mode
and the bar above indicates the signal strength of the repeater. See Direct
mode gateway and repeater on page 70.
To Next Page
Loading...