52Copyright © 2005 Nokia. All rights reserved.
• Pressing and holding the PTT key makes a call to the talk group whose name is
on the display. If the radio has just received a call from a scanned group and
the name of the scanned group is still on the display, the call is made to that
scanned group. If there have been no calls from scanned groups and the name
of the selected group is on the display, the call is made to the selected group.
For setting the functioning of the PTT key, see Push-to-talk setting on page 103.
■ Accessing the group list in standby mode
In standby mode, press to access the list of talk groups in the selected
folder. Scroll to the desired group and press Options for the following options:
Select to select the talk group, Set as home to set the group as the home group,
Send message to start sending a text message to the group, Send status to start
sending status messages to the group, and either Include to include the group in
scanning or Exclude to exclude the group from scanning.
■ Receiving a group call
You can receive group calls from your selected talk group, the home group and the
scanned groups in the selected folder.
When you receive a group call, the folder’s and group’s name and the caller’s
name or number and (receiving) are displayed in standby mode.
When nobody is speaking during a group call, is displayed if the call comes
from your selected group and is displayed if the call comes from a scanned
group.
To Next Page
Loading...