54Copyright © 2005 Nokia. All rights reserved.
To request for voice override, press Override and then press and hold the PTT key.
You can start speaking after a short tone is played and appears on the display.
Muting the call temporarily
When the radio is receiving a group call, you can mute the call for a predefined
time (0-60 seconds) by pressing .
■ Making a group call
Making a call to the selected talk group
Press and hold the PTT key when your selected group’s name is displayed in
standby mode. You can start speaking after a short tone is played and appears
on the display.
Making a call to a scanned talk group
You can make a call to a scanned group after the conversation has ended in it by
pressing and holding the PTT key while the group’s name and are still on the
display.
Note: If you have set the PTT key to always make a call to the selected group, you
cannot call a scanned group in this way (see PTT key use on page 51). To call the
scanned group, first set it as the selected group (see Selecting a talk group on
page 50).
To Next Page
Loading...