48Copyright © 2005 Nokia. All rights reserved.
Accessing the group list in standby mode on page 52 and Options in the group list
on page 56.
Making a call to the home group
You can easily select the home group by pressing and holding the back key. If
voice feedback is activated, the radio plays "Home". When the home group’s name
is displayed in standby mode, press and hold the PTT key. You can start speaking
after a short tone is played and (transmitting) appears on the display.
You can also set pressing and holding the duty key to make a call to the home
group (see Duty key setting on page 103). When you talk, press and hold the duty
key . Note that a handsfree microphone and a loudspeaker need to be
connected for this function to work.
Dynamic talk groups
Dynamic talk groups can be added to and removed from your radio’s memory over
the air by your service provider. When groups are added or removed, an
information note is displayed (e.g., Group added) and you can view the changes by
pressing View. The changes are saved in the Group journal submenu, see Group
journal on page 58.
The dynamic groups are included at the end of the selected folder, if the folder has
been set to show dynamic groups. For details, contact your service provider.
To Next Page
Loading...