Nomadix NWCG - ISP Requirements

ACCESS GATEWAY
Installation 15
 UTP network Cable with a RJ-45 connection (Package contents)
Note: Prepare twisted-pair cables with RJ-45 plugs. Use Cat.5 cable for all connections. Make sure
each cable does not exceed 328 feet (Approximately 100 meters).
ISP Requirements
 Verify whether your ISP uses fixed or dynamic IP. If it is a fixed IP, be sure to get the
IP from your ISP. For dynamic IP, which is mostly used, the PC will get the IP
automatically whenever it hooks to the modem.
Dynamic IP
 Dynamic IP Setting
Fixed IP
 Your fixed IP address for the Wireless Connect Gateway
 Your subnet mask for the Wireless Connect Gateway
 Your default gateway IP address
 Your DNS IP address
PPPoE
 Your user name from your ISP
 Your password from your ISP
PPTP
 PPTP Server IP Address from your ISP
 PPTP Local IP address from your ISP.
 PPTP Local IP subnet mask from your ISP.
 Your user name from your ISP
 Your password from your ISP
 Your PC Requirements
The Static IP settings for the PC
 Your PC’s fixed IP address
 Your PC’s subnet mask