Nord Drivesystems SK 510P - Frequency Inverter Installation

NORDAC PRO (SK 500P) – Users Manual for Frequency Inverters
26 BU 0600 en-2319
2.1 Frequency inverter installation
The frequency inverter is mounted directly on the rear wall of a control cabinet. For this, two, or for
size 3, four mounting holes are provided,
In general, care must be taken that the rear of the cooling element is covered with a flat surface and
that the device is mounted vertically. This enables optimum convection, which ensures fault-free
operation.
Frequency inverter type
Size
Housing dimensions Wall mounting
A B C D E
∅
SK 5xxP-250- … SK 5xxP-750- … BG1 200 65.3 140.6 180 / 5.5
SK 5xxP-111- … SK 5xxP-221- …
Size 2
240
65.3
140.6
220
/
5.5
SK 5xxP-301- … SK 5xxP-501- … Size 3 286 90 174.1 266 50 5.5
All dimensions in [mm]
A=
Total length
1)
B=
Total width
1)
C=
Total height
1)
D=
Longitudinal hole
spacing
2)
E=
Lateral hole spacing
2)
1) Delivery condition
2)
Fixing dimensions