Nordson 3100V Series Customer Product Manual

Operation A 4-5
Placing the
Unit
ln
Standby
Mode
Taking
the Unit Out
of
Standby
Mode
To
place
the unit in standby
mode,
press
the STANDBY key.
The
STANDBY light willturn
on and the READY light willturn off.
The
pump
will stop and the zone
temperatures will drop. The heaters
will
maintain
heated zones
at their standby
temperature setpoints.
You can also
program
the unit
to automatically enter the standby
mode
at
a specified time. Refer lo Programming
CLOCK Controlsinthe
lnstallation
section.
To remove the unit from standby mode,
press
the STANDBY
key. The
STANDBY
light willturn off and
the unit
will
heat each active
zone to its
operating
temperature setpoint.
You
can also
program
the unit to automatically exit the standby mode at a
specified time. Refer lo Programming
CLOCK Controlsinlhe
lnstallation
section.
@000
Nordson
Coporatlon
41-3000v
lssued 5/00
All rights reserved
A4EN-06-[3V-A-AAXV]-l

Nordson 3100V Series Specifications

General

Brand	Nordson
Model	3100V Series
Category	Melting Machines
Language	English