lnstallation A 3-1
Section
A
3
!nstallation
1. lntroduction
WARNING: Allow
only
qualified personnelto perform
the
following tasks. Follow the safety instructions in this document
and all other related documentation.
This section of the manual describes how to
.
installthe unit, hoses, and
guns
.
program
system settings
.
prepare
the unit for operation
lf
you
have
purchased
optional
features with
your
unit, such as a
low-level indicator or an inpuVoutput
(l/O)
board, refer
to
the
Options
section of
this
manual for installation instructions.
Besides
using
normal
care,
you
need no
special instructions to unpack
the
unit or
the
equipment
you purchased
with it.
All hoses and
guns
are
shipped
in
separate
packages.
After unpacking the equipment, inspect it for
any damage that
may have
occurred during shipping.
Look for
dents and scratches and make sure
all fasteners are tight. Report any damage to
your
Nordson
representative.
This
part
of the installation section
gives you
the installation requirements
and recommendations that
you
need to know
before
installing
your
unit.
It includes
.
LocationRequirements
o
Wiring Requirements
.
Hose/Gun Power Requirements
Other
requirements and recommendations
are
provided
in the installation
procedures
when
they are
needed.
2.
Unpacking
3.
lnspection
4. lnstallation
Requirements
O
2000 Nordson
Corporatlon
All rights reserved
41-3000v
lssued 5/00
A3 EN-04-[3V-X-4XXVj-1 3
To Next Page
Loading...
Need help?
General
