Nordson 3100V Series Customer Product Manual

A
5-2
Maintenance
2.
MaintenanceSchedule
Use Table A
5-1 to develop
a maintenance
schedule for
your
unit. Adjust
how
often
you perform
maintenance
based on
your
operating
environment.
You may find
that more or less frequent
maintenance
is
required in
some cases.
Table
A
5-1 Recommended
Maintenance
Schedule
Frequency Based
on
Run Time
of Heaters
(See
Note A)
Description
of Maintenance
Every
8
hours
Clean the
exterior surfaces
of the unit
and
guns.
Check the system
for leaks.
To replace
damaged hose
connector or
plug
o-rings,
refer
lo Replacing
Hose
Connector or Plug
O-Rings in this
section.
Flush
the manifold
filter. Refer
to Flushing a
Standard Manifold Filterin
this section.
Every
40 hours
Clean the manifold
filter. Refer
to
Cleaning a Standard Manifold
Filterin this
section.
Clean removable
nozzles. Refer
to the nozzle cleaning
procedure
in
the maintenance
section of
the
gun
manual.
Every
160 hours
Check
all electrical connections
and
terminal blocks for
tightness, including
those
inside
the
electrical enclosure.
As needed
Clean the
air
regulator
filter
element.
Clean the inside
of the electrical
enclosure.
Check electrical
connections
and terminal blocks for
tightness.
Check the hose
connections.
Flush
the system
with
a
flushing
material. Refer
to Ftushing
the System in
this section
NOTE A: To
find out how
many hours
your
system has been running
with the heaters
on, refer
lo Checking Run
Time
of Heafers
in this section.
41-3000y
lssued 9/98
€998 Nordson
Corporatlon
All rights reserved
AsEN{7-[3V-X-AXAX]-s

Nordson 3100V Series Specifications

General

Brand	Nordson
Model	3100V Series
Category	Melting Machines
Language	English