RTD-Style
Hot Melt Hose
3
Qualified
Personnel
lntended
Use
Operators or maintenance
workers
are
regarded
as
being
"qualified
personnel"
when
they
have
gained,
through
training and experience,
an
understanding of the
manner in which
the
unit is to be operated,
serviced,
and
repaired and are familiar with relevant
regulations concerning safe
workplace
practices.
The unit is designed and
intended
to be used
only for the
purpose
described inlhe
Descriplion
section.
Uses not in accordance
with that
section or
as
described in this document are considered
unintended uses
and
not in
accordance
with
governing
regulations.
WARNING: Use of this equipment
in ways other than
described in this document may
result
in
personal
injury death,
or
equipment
damage.
The
following
actions of the owner or operator
of
the
unit are some, but
not all, examples of unintended use which
would
permit
Nordson to claim
it is
not
responsible
for
personal
injury or
property
damage
arising from
such unintended
use:
a
a
a
Unapproved modifications or changes
to
the unit
Failure
to comply
with the safety instructions
Failure
to comply with instructions concerning installation,
use,
operation, maintenance, or repair, or when these tasks are carried out
by unqualified
personnel
Use of inappropriate or incompatible foreign materials or auxiliary
equipment
Failure
to observe workplace safety rules or regulations
issued by
government
authorities
or
safety
councils
a
a
O
ADo Nordson Corporation
All rights resarued
't08
232E
lssued 1/00
Manual 45-21