Nordson 3100V Series Customer Product Manual

Daily
Operations
Todothis...
Press this
key
. . .
This
happens
.
It means.
.
o
I
Turn
the
power
on
POWER
The
POWER
switch turns
on Power
to
the
unit is
on
Turn
the
power
off
The POWER
switch turns
off.
Power
to the
unit is off
Scan
the
temperatures
of
each zone.
The
MONITOR/SCAN
light
turns
on
and stays
on.
The
system
scans
each
heated
zone
and
displays
each
zone's
temperature.
The
system
displays
the
temperature
of only
the
zone
currently
selected.
$lf,l'o"o
c
Monitor
the temperatu
re
of a zone.
The MONITOR/SCAN
light
stays
on.
Place
the
system in
standby.
The
STANDBY
light
turns
on.
The
STANDBY
light
turns
off.
Heating
zones
hold
at
your preset
standby
temperatures.
Heating
zones return
to
your
operating
setpoint
temperatures.
Take
the system
out of
standby.
STANDBY
$o
Turn
the heaters
on
The
HEATERS
light
turns
on.
The
HEATERS
light
turns
off.
The
tank, hoses,
and
guns
are heated.
No
heat is
applied
to
system
components.
Turn
the
heaters off.
HEATEHS
@
o
Turn
the
7-day
clock
on.
The
CLOCK
light
turns
on.
The
system
performs
functions
controlled
by
the
clock.
The
system
does
not
perform
functions
controlled
by the
clock.
CLOCK
Turn
the 7-day
clock
off.
The
CLOCK
light
turns
off
Turn
the
pump
on
The
PUMP
light
turns
on.
The
pump
draws
melted
materialthrough
the
system.
The
pump
stops drawing
melted
material
through
the
system.
Turn
the
pump
off
PUMP
The
PUMP
light
turns
off
F
I
"F
o
Determine
whether
a
fault
was
corrected.
All LED
lights
turn on
white
the
system
begins
a
five-second
test.
At the
end
of
the
test,
the FAULT
light
turns
off.
All
LED
lights
turn
on while
the
system
begins
a
five-second
test. At
the end
of
the
test,
the FAULT
light
stays
on.
The
fault
was
corrected.
The
fault
was not
corrected.
PlEti.
A
original
copyright
dale
2/92. Nordson
is
a registered
trademark
of Nordson
corporation.
6
o 1 E N-O
PC-[3V
-2297771-1
lssued
4/98

Nordson 3100V Series Specifications

General

Brand	Nordson
Model	3100V Series
Category	Melting Machines
Language	English