Nortel 1220 - Call Override Features

Operating your IP Phone 1220
136
Using Voice Call
Use the Voice Call feature to make an announcement from another IP
Phone speaker.
Making a voice call
Use the following procedure to make a voice call.
Responding to a voice call
Use the following procedure to respond a voice call.
Call Override Features
Use the Call Override features to connect to a busy user. You can
connect to a user immediately or after their current call. Some call
override features are available only if your system administrator
configures them. Contact your system administrator to determine if the
following call override features are available:
• “Overriding a busy signal” on page 137
• “Using Forced Camp-on feature” on page 137
1. Lift the handset.
2. Press the VceCall key and make the
announcement.
3. Press the Goodbye key.
1. Your IP Phone rings once and the
caller's voice transmits through your
speaker. Lift the handset to respond.
VceCall
(Goodbye)