Nortel 1220 - Configuring New Call Indication

Customizing your IP Phone 1220—basic features
49
Configuring New Call Indication
You can configure your IP Phone 1220 to display a message that
indicates a new call. By default, this option is on.
Use the following procedure to configure New Call Indication.
6. Press the Select soft key to save the
configuration.
or
Press the Cancel soft key to keep
existing configurations.
1. Press the Services key, select
Telephone Options, and select Call
Log Options.
2. Press the Up or Down keys to scroll,
and select the Incoming Calls option.
3. Press the Up or Down keys to scroll,
and select the New Call Indication
option.
4. Press the Enter key.
5. Press the Up or Down keys to scroll,
and select one of the following:
— New call indication: Off
— New call indication: On
or
CancelSelect
(Services)