Operating your IP Phone 1220
97
Using Ring Again
Use the Ring Again feature to automatically redial the number if you
receive a busy tone, or if your called party does not answer. Your IP
Phone rings when the person you called becomes available.
Activating Ring Again
Use the following procedure to activate Ring Again.
Calling a Ring Again party after notification
Use the following procedure to call a Ring Again party after notification.
1. Dial a number.
The called party does not answer or you
receive a busy tone.
2. Press the Ring Again soft key.
or
Enter the Ring Again Activate Flexible
Feature Code.
1. After you receive the notification ring, lift
the handset; or, if you use the headset or
are in handsfree mode, go to step 2.
or
Ring Again
To Next Page
Loading...
