,QWURGXFWLRQ
Conventions and Symbols
2 AFP-300/AFP-400 Programming PN 50259:C1 06/19/97
&RQYHQWLRQVDQG6\PEROV
This manual uses conventions and symbols to provide the following types of
information:
• Note – indicates supplementary information.
•
Warning
– indicates information about procedures that could cause error,
programming errors, runtime errors, or equipment damage.
For presentation and printing purposes, this manual uses different typeface characters,
in place of the actual LCD letters that you see on the panel display.
(QWHULQJ,QIRUPDWLRQIURPWKH&RQWURO3DQHO
Figure 1 identifies the control panel keys that you use when programming the control
panel:
)LJXUH &RQWURO 3DQHO .H\V
8VLQJ3URJUDPPLQJ.H\V
Table 2 contains definitions for keys used to program the control panel:
Table 2 Common Programming Keys
3URJUDPPLQJ NH\V
4:(57< .H\SDG
&XUVRU PRYHPHQW
NH\V
)OLSGRZQ GRRU
Press this key To
&
Accept information.
6
Aborts last operation without saving information.
Also use to exit Program mode.
/
Move the cursor to the next field.
0
Move the cursor to the previous field.
*
Move the cursor among data fields.
To Next Page
Loading...
Need help?
General
