Novation Xio - Page 66

Logic 7 (continued)
Then replace them with the ones in the Logic 7 folder on the Resources disk. Note that any existing Control
Surface and Key Command preferences will be overwritten. The project 'XIO_LOGIC_PRO_7.lso' has been
created to correspond best to the Xio assigned controls. To save this as the default Logic project rename it
'autoload.lso' and place it in the folder:
User/Library/Application Support/Logic/Song Templates
Note that it is not necessary to use 'XIO_LOGIC_PRO_7.lso' project when using the Xio to control Logic Pro
7.
Minimonsta
Layout
Group A
Knobs 1 and 2: Osc 1 Range and Mix
Knobs 3-5: Filter Cut, Emphasis and Centre
Knob 6: Mod Mix
Knobs 7-9: VCA Attack, Decay and Sustain
Knob 10: Master Volume
Knob 11: Delay Amount
Buttons 1 and 2: Osc 1 On/Off and Waveform
Buttons 3 and 4: VCF Keyboard 1 and 2
Buttons 5 and 6: Osc 3 Control and Osc Mod
Buttons 7-11: No Control
Group B
Knobs 1 and 2: Osc 2 Range and Mix
Knob 3: Osc 3 Mix
Knob 4: Noise Mix
Knob 5: Ext Input Mix
Knob 6: Mod Mix
Knobs 7-9: VCF Attack, Decay and Sustain
Knob 10: No Control
Knob 11: Delay Feedback
Buttons 1 and 2: Osc 2 On/Off and Waveform
Button 3: Osc 3 On/Off
Button 4: Noise On/Off
Button 5: Noise Colour
Button 6: Filter Mod
Buttons 7-11: No Control