35
n Silent Mode
Turn off beeping sound for quieter cooking in noise-sensitive environment.
In standby mode “- - - -”, press and hold [ – ] button for 3 seconds. The
display window will show “BEEP OFF” for 3 seconds and then revert to
“- - - -”. The beep feature is now turned off and the appliance will not emit
beeps during and after cooking. To re-activate the beep feature, press and
hold down [ + ] button for 3 seconds. The display window will show “BEEP
ON” for 3 seconds and then revert to “- - - -”.
n Keep Warm Function
Used for keeping cooked food warm or reheating food.
Except when cooking under STIR FRY function, the unit will automatically
switch to WARM function for up to 12 hours after cooking time has ended
if the WARM function is not cancelled during program setting. Press the
[CANCEL] button to cancel WARM program.
To remove automatic Keep Warm function to allow foods to cool down
after cooking is completed, press the [WARM] button once to cancel the
setting before program starts. The red indicator light for [WARM] will be
turned off.
Function Default Time Timer Temperature
Warm
12 hours
0:30-12:00,
30 minutes increments
68°C -70°C
To reheat food:
1. Place the inner pot into the NEMPC. Then place food into the inner pot to
reheat.
2. Place the lid on the cooker, align the self-locking pin with the unlock
symbol and turn the lid counterclockwise until it locks into place.
3. Turn the pressure regulator knob to “STEAM”.
4. Press the [WARM] button. Adjust time by pressing the [ + ] or [ – ] buttons
and then wait for 4 seconds. The unit will start to heat up automatically.
5. When the time is up, the unit will beep to let you know that the heating
process has ended.
Standby Mode Beep On Beep Off
To Next Page
Loading...