NPK GH1 - Tool Specifications

- 115 -
REBUILD SPECIFICATIONS CHECK SHEETS
TOOL:
DIAMETER
d16a d16b
Dimensions to 0.00 inch (0.0 mm)
GH3 thru GH6
UPPER TOOL BUSHING:___________ I.D. (d41)
Dimensions to 0.00 inch (0.0 mm)
LOWER TOOL BUSHING: __________ I.D. (d41)
Dimensions to 0.00 inch (0.0 mm)
COMMENTS:
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
50 = STAMPING
___________________
___________________
___________________