22
Operation Procedure
5 – 5 Initialization of program (factory-set configuration)
The program can be returned to the original state configured at the time of factory shipment, if setup
becomes confusing�
1
Turn off the control unit�
2
Connect the AC adaptor and confirm that the
AC IN lamp lights up�
3
While pressing the AUTO REVERSE key and
MEMORY key simultaneously (
), press and
hold the POWER key for 1 second or longer
(
)�
4
Release the keys when the LCD display
indicates “SEt”, and re-press the MEMORY
key while this is displayed�
5
Initialization is completed, when “FIn” is
displayed�
→
4
3- /C
4
4
1/A,
3- /D
2/B
5
A:ON OFF
B: Illuminated
C: Press and hold simultaneously for 1
second or longer�
D: Press and hold for 1 second or longer�
NOTICE
● This function is not activated unless this product is powered by the AC adaptor�
● If this function is used, all programs will disappear and return to the originally set values� Record
the present program details according as needed�
To Next Page
Loading...
