NSK Ultimate XL User Manual

14
Fig.15
Handpiece Holder
At the bottom of the handpiece stand, tools
necessary for handpiece maintenance and a
spare chuck (optional) can be mounted.
(Fig. 14)
12. Handpiece Stand
The handpiece holder that can be mounted on
the right side of the control unit will widen a your
effective work area. Insert the holder into the slot
and fasten the screw. Adjust the holder angle to
your best position. (Fig. 15)
13. Handpiece Holder
Control Unit
Model
Power supply
Rated Power
Weight
Dimensions
NE213-G (Gray)
NE213-W (White)
AC120V 50/60 Hz 46VA
AC230V 50/60 Hz 46VA
46VA
2.8kg
W167 x D247 x H77mm
14. Specification
Fig.14
Motor Handpiece
1 ) Torque Type
Model
Speed
Max. Torque
Weight
Dimensions
Cord Length
UMXL-T(P) / UMXL-T(P) 2M
1,000
~
50,000 min
-1
8.7N · cm
215g ( exclude the cord)
L151 x ø 29mm
1.2m / 2.0m
2 ) Compact Type
Model
Speed
Max. Torque
Weight
Dimensions
Cord Length
UMXL-C/ UMXL-C 2M
1,000
~
50,000 min
-1
6 N · cm
181g ( exclude the cord)
L144 x ø 27mm
1.2m / 2.0m
Food Pedal
Model
Weight
FC-64
460g
Handpiece
Model
Weight
Handpiece Stand
120g

NSK Ultimate XL Specifications

General

Brand	NSK
Model	Ultimate XL
Category	Laboratory Equipment
Language	English