7
1. Connect Power Cord to a wall outlet.
2. Make sure that Speed Control Knob is at the lowest speed position.
3. Turn Power Switch ON (Green Power Lamp will light). The preset rotation speed will
appear on the Indicator.
4. Select the rotation direction with Forward/Reverse Selector Switch. Each time this switch
is pressed, the direction changes between FORWARD and REVERSE.
5. Select the control method with Hand/Foot Selector Switch. Each time this switch is
pressed, the method changes between the HAND and FOOT.
Operation - 1
HAND Operation
6. Select HAND with Hand/Foot Selector Switch.
7. Preset the rotation speed with Speed Control Knob with checking the speed on the
Speed Display.
8. Press Motor Switch, and the motor will run.
9. To stop the motor, press Motor Switch again.
Operation - 2
Operation by Foot Pedal
6. Select FOOT with Hand/Foot Selector Switch.
7. Preset the maximum rotation speed with Speed Control Knob with checking the speed
on the Speed Display.
8. Depress Foot Pedal, and the motor will run. The rotation speed can be variably
controlled within the preset maximum rotation speed range according to the amount of
depressing Foot Pedal.
Auto speed mechanism
To Fix the speed within the rotation speed range set by the volume, press Motor Switch
while the motor is running at the desired speed. The display lamp will flash and the rotation
speed can be maintained even if Foot Pedal is released. To cancel it, press Motor
Switch again or depress Foot Pedal again.
3. Operation Procedure
4
7
8
8
8
3
3
9
9
3
3
9
9
12
12
12
16
English
To Next Page
Loading...
Need help?
General
