NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
18
View IP Devices
The View IP Devices selection will show the present status of each IP Device monitored by the ENVIROMUX.
The current value being reported by the IP Device and the state (whether Normal or Alert) will be shown. If the IP Device is in
alert status, pressing the <Enter> key would provide the option to either acknowledge the alert or dismiss it.
Figure 11- Text Menu-View IP Devices
View Output Relay
The View Output Relay selection will show the present state of the Output Relay on the ENVIROMUX. To manually change its
state, press <Enter> and select between Inactive and Active.
Figure 12- Text Menu- View Output Relay Status
Press <Enter> to open
window to change state if
desired.
To Next Page
Loading...
Need help?
General
