NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
57
Contact Settings
Under Contact Settings, the non-administrative user can decide which sensor group messages they will receive and how.
Figure 71- Text Menu-User Contact Settings
Contact Settings
Group x Change to “Yes” to receive messages from sensors, IP devices and accessories in any Group
that sensors have been assigned to
Enable Email Change to “Yes” to receive messages via email
Email address Enter a valid email address to receive email alert messages
Syslog alerts Change to “Yes” to receive alerts via syslog messages
SNMP traps Change to “Yes” to receive alerts via SNMP traps
Syslog/SNMP IP address Enter a valid syslog/SNMP IP address to receive syslog/SNMP messages
Press <Tab> to highlight Save and press <Enter> to save before pressing <Esc> to exit.
To Next Page
Loading...
Need help?
General
