NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
37
IPv4 Settings
The IP Settings menu contains the network connection settings for the ENVIROMUX.
Figure 41- Text Menu-IPv4 Settings Menu
IP Settings Description
IPv4 Mode Select between Static (manual) , or DHCP (automatic IP and DNS) settings
IPv4 Address Enter a valid IPv4 address (default value is 192.168.1.21)
IPv4 Subnet Mask Enter a valid subnet mask (default value is 255.255.255.0)
Default Gateway Enter a valid gateway (default gateway value is 192.168.1.1)
Preferred DNS Enter a preferred domain name server address
Alternate DNS Enter an alternate domain name server address
DNS Timeout Enter a value from 1-30 (seconds) to query a DNS server before timing out
If the administrator chooses to have the DNS and IP address information filled in automatically via DHCP, the SMTP server and
port number still need to be entered for email alerts to work. If the SMTP server requires a password in order for users to send
emails, the network administrator must first assign a user name and password to the ENVIROMUX.
Press <Tab> to highlight Save and press <Enter> to save before pressing <Esc> to exit.
IPv6 Settings
If IPv6 protocol will be used, change the
mode to “Enabled” and apply valid in
addresses for the IPv6 address and gateway.
To use a 6to4 tunnel, change “Disabled” to
“Enabled” and apply valid local and remote
addresses.
Figure 42- Text Menu-IPv6 Settings Menu
To Next Page
Loading...
Need help?
General
