NTI ENVIROMUX Series Manual

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
42
User Configuration
The User Configuration menu lists all configured user names of the ENVIROMUX. A maximum of 15 users (other than root) can
be configured. From this screen the administrative user can add users, go to the user configuration page to edit a user’s access
to the ENVIROMUX, or delete a user from the list.
Figure 48- Text Menu-User Configuration
To add a user, Tab to “Add User” and press <Enter>.
To edit a user’s configuration, select the listed username and press <Enter>
To delete a user and their configuration, select a listed username, Tab to “Delete User”, and press <Enter>. You will be
prompted for confirmation before deleting the user and configuration.
When adding a new user, you will be prompted to confirm the addition of the user. At that point, the Configure User menu will
open a user settings list with the username “userx” assigned, where x = the next consecutive number (up to 15) based on the
quantity of users in the list (other than the root user).
Figure 49- Text Menu-Confirm to add new user

NTI ENVIROMUX Series Specifications

General

Product Type	Environmental Monitoring System
Temperature Range	-40°C to 85°C
Power Supply	12V DC or 24V AC
Network Interface	Ethernet 10/100 Mbps
Alarm Notifications	Email, SNMP
Sensor Types Supported	Temperature, Humidity, Water, Airflow
Power	12V DC or 24V AC
Operating Temperature	-40°C to 85°C
Mounting	Wall or Rack Mount
Communication Interfaces	Ethernet
Data Logging	Yes
Compliance	CE, RoHS