NTI ENVIROMUX Series Manual

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
44
Account Settings Description
Enabled Change to “Yes” to enable this user to access the ENVIROMUX
Admin Change to “Yes” if this user should have administrative privileges
Title Enter information as applicable (optional)
Company Enter information as applicable (optional)
Department Enter information as applicable (optional)
LDAP CN “Common Name” assigned in the LDAP server account in an Active Directory. Often a name assigned
that is different than the Username. If this is the same as the Username (above), this can be left blank.
LDAP OU Enter the Organizational Unit the user belongs to in an Active Directory
Format is <ou,ou,etc>
More about User Privileges
The root user (or any user with administrator rights) can change the root password and configure how the root user will receive
alert messages. Users with administrative rights can change all configuration settings except for the root user name.
User Contact Settings
Select “Contact Settings” from the list and press <Enter>. A menu with the contact settings for that specific user will open.
Figure 52- Text Menu-User Contact Settings
Contact Settings
Group 1-8 Change to “Yes” if the user should receive messages from sensors, IP devices and accessories
in Groups 1-8
Email Alerts Change to “Yes” if the user should receive messages via email
Brief Email Change to “Yes” if the user should receive messages with limited content via email
Email address Enter a valid email address if the user should receive email alert messages
Syslog alerts Change to “Yes” if the user should receive alerts via syslog messages
Syslog Facility Select a Syslog Facility for the messages to be sent to- Local0 thru Local7 (default is Local0).
SNMP traps Change to “Yes” if the user should receive alerts via SNMP traps
Syslog/SNMP IP address Enter a valid syslog/SNMP IP address for the user to receive syslog/SNMP messages
SMS Alerts Change to “Yes” if the user should receive alerts via SMS messages
SMS Number Enter a valid phone number for the user to receive SMS messages
Press <Tab> to highlight Save and press <Enter> to save before pressing <Esc> to exit.

NTI ENVIROMUX Series Specifications

General

Product Type	Environmental Monitoring System
Temperature Range	-40°C to 85°C
Power Supply	12V DC or 24V AC
Network Interface	Ethernet 10/100 Mbps
Alarm Notifications	Email, SNMP
Sensor Types Supported	Temperature, Humidity, Water, Airflow
Power	12V DC or 24V AC
Operating Temperature	-40°C to 85°C
Mounting	Wall or Rack Mount
Communication Interfaces	Ethernet
Data Logging	Yes
Compliance	CE, RoHS