Maintaining and Servicing the NVIDIA DGX-1
www.nvidia.com
NVIDIA DGX-1 DU-08033-001 _v13.1|52
d) Be sure all the check boxes under Select Preserve Configuration are cleared.
This ensures that the BIOS reverts to its fail-safe default settings for a reliable
update.
e)
Click Upload Firmware to start the process of installing the updated BIOS.
You are asked to wait while the image is verified.
f)
Click OK at the Proceed? dialog to start the actual upgrade process.
The BIOS Flash Status screen shows the upgrade progress, which should take a
couple of minutes to complete.
Do not interrupt the upgrade process once it has started.
4.
After the upgrade process has completed, you can use the top menu to turn the
system back on.
a)
From the top menu, click Remote Control and then select Server Power Control.
b)
Select the Power On Server option, and then click Perform Action.
5.
To verify that the BIOS was updated with the proper file, press [F2] or [Del] to enter
the BIOS setup screen when the system reboots, then compare the Project Version
with the update filename.
To Next Page
Loading...
Need help?
General
