Nvidia DGX-1 User Manual

Maintaining and Servicing the NVIDIA DGX-1
www.nvidia.com
NVIDIA DGX-1 DU-08033-001 _v13.1|87
CAUTION: Static Sensitive Devices: - Be sure to observe best practices for electrostatic
discharge (ESD) protection. This includes making sure personnel and equipment are
connected to a common ground, such as by wearing a wrist strap connected to the chassis
ground, and placing components on static-free work surfaces.
The DIMMs are located on the motherboard tray, which is accessible from the rear of the
DGX-1.
1.
Turn off the DGX-1 and disconnect all network and power cabling.
2.
Remove the motherboard tray.
a) Locate the locking levers for the motherboard tray at the rear of the DGX-1.
There are two sets of locking levers. The locking levers for the motherboard are
the bottom set.
b) Rotate the retention clasps inward towards the center of the unit.
The retention clasps hold the locking levers in place. Rotating the clasps inward
releases the locking levers.
c) Swing the locking levers out and then use them to pull the motherboard tray out
of the unit.
Do not pull the unit by the blue retention clasps; they may break.

Nvidia DGX-1 Specifications

General

Brand	Nvidia
Model	DGX-1
Category	Desktop
Language	English