Introduction to the NVIDIA DGX A100 System
NVIDIA DGX A100 DU-09821-001 _v01|5
Power Cord Feature Specification
Plug Standard C19/C20
Dimension 1200mm length
Compliance
Cord: UL62, IEC60227
Connector/Plug: IEC60320-1
1.1.5. Using the Locking Power Cords
This section provides information about how to use the locking power cords.
Locking and Unlocking the PDU Side
Power Distribution Unit side
‣
To INSERT, push the cable into the PDU socket.
‣
To REMOVE, press the clips together and pull the cord out of the socket.
Locking/Unlocking the PSU Side (Cords with Switch-Lock Mechanism)
Power Supply (System) side - Switch locking
‣
To INSERT or REMOVE make sure the cable is UNLOCKED and push/ pull into/out of the
socket.