SBIOS Settings
NVIDIA DGX A100 DU-09821-001 _v01|73
Here are some occasions where it might be necessary to reconfigure settings in the SBIOS:
‣
Configuring a BMC Static IP Address Using the System BIOS
‣
Enabling the TPM and Preventing the BIOS from Sending Block SID Requests
‣
Clearing the TPM
11.2. Configuring the Boot Order
The following instructions describe how to set the boot order at boot time. You can also set the
boot order from the SBIOS setup > Boot screen.
1. Access the DGX A100 console, either from a locally connected keyboard and mouse or
through the BMC remote console.
2. Reboot the DGX A100.
3. Press [F11] at the NVIDIA splash screen.
To Next Page
Loading...
