Nvidia DGX A100 User Manual

Using the BMC
NVIDIA DGX A100 DU-09821-001 _v01|62
version, and number of retired pages for each
GPU.
Logs and Reports View, and if applicable, download and erase, the
IPMI event log, and System, Audit, Video, and
POST Code logs.
Settings
Configure the following settings:
Captured BSOD, External User Services, KVM
Mouse Setting, Log Settings, Media Redirection
Settings, Network Settings, PAM Order Settings,
Platform Event Filter, Services, SMTP Settings,
SSL Settings, System Firewall, User Management,
and Video Recording
Remote Control Opens the KVM Launch page to remotely access
the DGX A100 console.
Power Control
Perform the following power actions:
Power On, Power Off, Power Cycle, Hard Reset,
and ACP/Shutdown
Chassis ID LED Control Lets you to change the chassis ID LED behavior:
Off, Solid On, Blinking On (select from 5 to 255
second blinking intervals).
Maintenance
Perform the following maintenance tasks:
Backup Configuration, Firmware Image Location,
Firmware Update, Preserve Configuration,
Restore Configuration, Restore Factory Defaults,
and System Administrator
Sign out Sign out of the BMC web UI.
10.3. Common BMC Tasks
This section provides information about the most common BMC tasks.
10.3.1. Changing the BMC Login Credentials
Here is information about how you can add or remove users.
1. Select Settings from the left-side navigation menu.
2. Select the User Management card.


Nvidia DGX A100 Specifications

General

Brand	Nvidia
Model	DGX A100
Category	Computer Hardware
Language	English