Nvidia DGX A100 User Manual

NVIDIA DGX A100 DU-09821-001 _v01|20
Chapter3. First Boot Setup
This section provides information about the set up process after you first boot the DGX A100
system.
While NVIDIA partner network personnel or NVIDIA field service engineers will install the DGX
A100 system at the site and perform the first boot setup, the first boot setup instructions are
provided here for reference and to support any reimaging of the server.
3.1. Setting up the System
These instructions describe the setup process that occurs the first time the DGX A100 system
is powered on after delivery or after the server is re-imaged.
Be prepared to accept all End User License Agreements (EULAs) and to set up your username
and password. To preview the EULA, visit https://www.nvidia.com/en-us/data-center/dgx-
systems/support/ and click the DGX EULA link.
1. Connect to the DGX A100 console as explained in “Connecting to the Console”.
2. To power on the DGX A100 system in one of the following ways:
‣
Using the physical power button.


Nvidia DGX A100 Specifications

General

Brand	Nvidia
Model	DGX A100
Category	Computer Hardware
Language	English