Nvidia DGX A100

NVIDIA DGX A100 DU-09821-001 _v01|59
Chapter10. Using the BMC
The NVIDIA DGX A100 system comes with a baseboard management controller (BMC) for
monitoring and controlling various hardware devices on the system. It monitors system
sensors and other parameters.
10.1. Connecting to the BMC
Here are the steps to connect to the BMC on a DGX A100 system.
Before you begin, ensure that you have connected the BMC port on the DGX A100 system to
your LAN.
1. Open a browser within your LAN and go to https://<bmc-ip-address>/.
The BMC is supported on the following browsers:
‣
Internet Explorer 11 and later
‣
Firefox 29.0 (64-bit) and later
‣
Google Chrome 7.0.3396.87 (64-bit) and later
2. Log in.
The BMC dashboard opens.
