Nvidia DGX A100

NVIDIA DGX A100 DU-09821-001 _v01|15
Chapter2. Connecting to the DGX A100
This section provides information about how to connect to the DGX A100 system.
2.1. Connecting to the Console
Connect to the DGX A100 console using either a direct connection or a remote connection
through the BMC.
CAUTION: Connect directly to the DGX A100 console if the DGX A100 system is connected to a
172.17.xx.xx subnet.
DGX OS Server software installs Docker Engine which uses the 172.17.xx.xx sub-net by default
for Docker containers. If the DGX A100 system is on the same sub-net, you will not be able to
establish a network connection to the DGX A100 system.
Refer to Configuring Docker IP Addresses for instructions on how to change the default Docker
network settings.
2.1.1. Direct Connection
At the front or the back of the DGX A100 system, you can connect a display to the VGA
connector and a keyboard to any of the USB ports.
Note: The display resolution must be 1440x900 or lower.
