Nvidia DGX A100 User Manual

Connecting to the DGX A100
NVIDIA DGX A100 DU-09821-001 _v01|18
‣
Username: admin
‣
Password: dgxluna.admin
CAUTION: When you create a BMC admin user, we strongly recommend that you change the
default password for this user. Do not use the default password.
After the First Boot Setup
During the first-boot procedure, you were prompted to configure an administrator username
and password and a password for the BMC. The BMC username is the same as the
administrator username:
‣
Username: <administrator-username>
‣
Password: <bmc-password>
1. Make sure you have connected the BMC port on the DGX A100 system to your LAN.
2. Open a browser within your LAN and go to https://%3Cbmc-ip-address%3E/.
3. Make sure popups are allowed for the BMC address.
4. Log in.


5. From the left-side navigation menu, click Remote Control.
The Remote Control page allows you to open a virtual Keyboard/Video/Mouse (KVM) on the
DGX A100 system, as if you were using a physical monitor and keyboard connected to the
front of the system.

Nvidia DGX A100 Specifications

General

Brand	Nvidia
Model	DGX A100
Category	Computer Hardware
Language	English