NXP Semiconductors
UM12036
MCX-N9XX-EVK Board User Manual
Pin number Net name GPIO Potential conflict
72 3V3 - -
73 REFCLK_N1 - -
74 3V3 - -
75 GND - -
Table 21. M.2 connector (J12) pinout...continued
2.12 Arduino compatible I/O headers
The MCX-N9XX-EVK provides Arduino Uno compatible headers to support the Arduino and FRDM ecosystem
shield modules. These headers are dual-row headers with the outer rows supporting the Arduino compatible
shields and the inner rows supporting the various FRDM shields. These headers are designed to support the
following shields:
• Sensor: FRDM-STBC-AGM01, FRDM-STBC-AGM04, FRDM-FXS-MULT2-B
• NFC: OM5577, OM5578
• USB Type C: OM13790 (Host)
• Motor control: FRDM-MC-LVBLDC, FRDM-MC-LVPMSM
• Touch: FRDM-TOUCH
Table 22 describes the connectors of the Arduino socket.
Part identifier Connector type
J1 2x8 position receptacle
J2 2x10 position receptacle
J3 2x8 position receptacle
J4 2x6 position receptacle
Table 22. Arduino socket connectors
Figure 25 shows the pinout of the Arduino socket connectors.
UM12036 All information provided in this document is subject to legal disclaimers. © 2024 NXP B.V. All rights reserved.
User manual Rev. 1 — 20 January 2024
35 / 51
To Next Page
Loading...
