NXP Semiconductors MCX-N9 EVK Series - Power Supply Configuration

NXP Semiconductors
UM12036
MCX-N9XX-EVK Board User Manual
SHORTING HEADER ON BOTTOM LAYER
Figure 11. Power configuration jumpers
.
The MCX-N9XX-EVK board supports current measurement for board power supplies through the onboard
MCU-Link debug probe. For more details, see Section 3.10.
2.1.1 Power supply configuration
• Table 10 describes the default power jumper configuration for the MCX-N9XX-EVK board.
UM12036 All information provided in this document is subject to legal disclaimers. © 2024 NXP B.V. All rights reserved.
User manual Rev. 1 — 20 January 2024
19 / 51