NXP Semiconductors MCX-N9 EVK Series - Board Kit Contents; Board Pictures

NXP Semiconductors
UM12036
MCX-N9XX-EVK Board User Manual
Board feature Target MCU features used Description
Debug • Onboard MCU-Link debug probe with CMSIS-DAP and
SEGGER J-Link protocol options. It can connect to the
target MCU through a USB-to-UART, USB-to-SPI, or USB-
to-I2C bridge.
• 10-pin Arm JTAG/SWD connector for connecting an
external debug probe
PCB 6” 3/4 x 4” 5/16 x 1/16”
Orderable part
number
MCX-N9XX-EVK
Table 1. MCX-N9XX-EVK features...continued
1.3 Board kit contents
The MCX-N9XX-EVK board kit contains the following items:
• MCX-N9XX-EVK board hardware assembly
• A 3 ft micro USB A to micro USB B cable
• Nylon screws (4-40 x ¼”)
• Nylon standoffs (4-40 x 1.25, 3/16 Hex)
1.4 Board pictures
Figure 2 shows the top view of MCX-N9XX-EVK.
MCX N947
processor
Figure 2. MCX-N9XX-EVK top view
UM12036 All information provided in this document is subject to legal disclaimers. © 2024 NXP B.V. All rights reserved.
User manual Rev. 1 — 20 January 2024
4 / 51