NXP Semiconductors MCX-N9 EVK Series - Page 5

NXP Semiconductors
UM12036
MCX-N9XX-EVK Board User Manual
Figure 3 shows the top-side view of the MCX-N9XX-EVK board, with connectors, push buttons, and LEDs
highlighted.
J21
(PMIC
controller)
J5
(MCU-Link USB)
J11
(Debug and trace)
J27
(HS USB)
J28
(FS USB)
J13
(MCU-Link
GPIO header)
J14
(DMIC EXP.)
J25
(SDHC)
J9
(External Flash)
J29
(CAN Bus)
J2 J1
(Arduino)
J3 J4
(Arduino)
J19
(MikroBUS)
J22
(MikroBUS)
J20
(FlexIO)
J12
(M.2)
J15
(MCU-Link SWD)
J8
(10 / 100 Mbit/s RJ45)
E1
(Touch slider)
SW1
(MCX N9
Reset)
SW6
(MCU-Link
Reset)
SW3
(NMI)
SW3
(ISP)
SW4
(Wakeup)
SW5
(PMIC RST)
D22
(RGB LED)
D25
D24
D7
D21
D13 D14 D8 D12 D10 D11 D9
MCU-Link
LEDs
Figure 3. MCX-N9XX-EVK connectors, push buttons, and LEDs (top-side view)
Figure 4 shows the jumpers of the MCX-N9XX-EVK board.
UM12036 All information provided in this document is subject to legal disclaimers. © 2024 NXP B.V. All rights reserved.
User manual Rev. 1 — 20 January 2024
5 / 51