NXP Semiconductors MPC57 Series User Manual

Model Based Design Toolbox MPC57xx Series
Quick Start Guide
2-16
5. Click on Flash button to start the flash programming sequence. The debugger will
connect with the target selected and will start to flash the RBF image into the non-
volatile memory of the target.
At this point the target should be ready for receiving applications from MATLAB/Simulink
environment over the UART interface connected via OpenSDA.

NXP Semiconductors MPC57 Series Specifications

General

Brand	NXP Semiconductors
Model	MPC57 Series
Category	Motherboard
Language	English