Oceasoft LoRaWAN - Finalizing Ethernet Configuration; Finalizing Ethernet Settings

Setting up your receiver
OCEASOFT LoRaWAN Receiver User Guide Page 21
3. Click on when you are done.
If you connected your computer directly to the receiver with an Ethernet
cable remember to plug the receiver into your Local Area Network.
It is essential to leave the DHCP Server option
disabled on your receiver (
Setup

DHCP
).
Enabling that option could
create a conflict with
your network’s DHCP server
. This is not to be
confused with
the DHCP Client option described
above. You do not need to configure other options
in the Network Interfaces section.