Service Manual RU OHAUS
Page 28 / 53 11/01/2010 Ohaus
14. Replace display
Take out display
• Power off and take out the power cable from electrical outlet.
• Take away platter.
• Take away the tower kits.
• Screw out 2 bolts in the display cover, and take out the front cover, show the display.
• Screw 5 bolts of the front display, pull out harness and take away the display.
• Screw 4 bolts of back display and pull out harness, take away back display.
Install display
• Put the back display to right position and screw in 4 bolts to fix it.
• Plug in harness of display.
• Also the harness to front display.
• Put on the front display.
• Screw in bolts for installation.
• Put the front display.
• Screw in 2 fix bolts of cover.
• Install the tower to base.
• Put on platter.
• Power on scale.
To Next Page
Loading...
